CHASSIS BLACK 4:1 SINGLE STAGE
A 4:1 2K DIRECT TO METAL and DIRECT TO RUST Urethane Chassis Paint. Catalyst Included! Excellent adhesion to metals, plastics and painted surfaces. Easy sand. MIX 4 parts Primer to 1 part HH193 Hardener. This is not a semi gloss or a satin chassis system. Its a 90% gloss. Its only lessened due to the rust converting additive. A Durable Direct to Metal self-priming 2K Polyurethane for long lasting economical finishes for an easy-to-apply use. Fills minor scratches. This product will blow POR 15 away. This uses HALOX 630 antirust inhibitor/ converter. Its not moisture cured. Its ISO cured. Great for new and older chassis with surface rust in hard to reach places. Much less expensive than POR 15 without the hassle of 1K moisture urethanes (that go bad once the top is lifted off!) Also for Industrial applications needing direct to metal finishes. Mix ratio 4:1 long pot-life. Quick Dry! Comes in gallons and quarts Low Cost, the best bang for the buck! Durable 5-10 year system, depending on conditions. Use over Tamcos unique DIRECT TO ANYTHING 2K Epoxy Primer or our DTM and DTR (direct to rust) 2K Primer systems for optimum results and extra fill capabilities. 3 full coats will covert and encapsulate all surface rust.