FLO N GO

Tamco's Flo N Go retarder is a specialty product that slows down the catalyzation of 2K products like clears, urethane primers and single stage colors. This is a ready-to-spray blending agent used to melt the edge of 2K urethane topcoats.

MIXING:
1. Shake thoroughly before using.
2. ready to spray.
3. Application must be performed using a two-gun method. The first gun will contain either a Single Stage or Clearcoat system, and the second gun will contain Tamco's Flo N Go 1K Ready to Spray Color Blender used to melt the wet edge of the blend.
4. Using the two gun method, adjust air pressure of the second gun containing the Flo N Go 1K Ready to Spray Color Blender. Spray 1-2 even wet-on-wet coats to melt in the outer edge of the Single Stage color or Clearcoat at a gun distance of 5"- 7". Recommended dry film thickness is 0.2-0.5 mil. Allow flo N Go 1K Ready to Spray Color Blender to dry overnight. If force drying/baking, allow panel(s) to cool down before polishing blended area.

SINGLE STAGE APPLICATIONS: of Flo N Go 1K Ready to Spray Color Blender is used with Single Stage colors apply the Single Stage paint over the repaired area carrying out the wet edge just beyond the repair, and then allow the Single Stage paint to flash per recomendation. Apply a second coat to achieve proper hiding and blending of the color into the repaired area and lightly feather the outer edge. Immediately after feathering the final coat, melt the feathered edge with a wet-on-wet application using Flo N Glo 1K Ready to Spray Color Blender.

BASECOAT CLEARCOAT APPLICATIONS: Of Flo N Go 1K Ready to Spray Color Blender is used with a Tamco Urethane Clearcoat, apply one coat of clear just beyond the edge of the repaired area, allowing the Clearcoat to flash per recommendation. Apply a second coat of clear carrying out the wet edge just beyond the first pass of clear and lightly feather the outer edge. Immediately after feathering the final pass of clear, melt the feathered edge with a wet-on-wet application using Flo N Go 1K Ready to Spray Color Blender.
Item# Description Qty. Price
Flo N Go Quart Flo N Go Additive $39.95 ADD TO CART
Flo N Go Pint Flo N Go Additive $24.95 ADD TO CART

There are no Tech Sheets available.

Be the first to add a review for this product

Review Product
SIGN UP TODAY!
Be the first to find out about Tamco Paint specials, new product offerings, special events and so much more!