HP-2010 is a multi-use adhesion promoter that is clear in color with no pink hue like many other on the market. In the normal refinish industry this product can be used on raw plastics such as bumpers before applying primers or top coats. Another use is in door jambs. Once properly cleaned our adhesion promoter can be sprayed and topcoated in jambs without sanding or used on any other hard to reach ares without the risk of delamination. In the custom side of painting HP-2010 has a wide variety of uses. It can be applied directly to metal with no need for sanding. Polished aluminum looks amazing but not long after it will begin to lose its luster. Our adhesion promoter can be applied directly on top of polished aluminum and then clearcoated for a lifelong durable shine. Since it dries clear it will not add any discoloration. Custom painters often find that they have exceeded the recoat window for the next coat of paint. All you have to do is apply HP-2010 and can start back on your work after a short flash time without having to sand and ruin what you've already done. Tamco HP-2010 is a must have for the collision, restoration or custom paint world.

1)Always wash with soap before using a wax and grease remover!
2) Apply 397 with a rag, or a spray bottle.
3) WIPE OFF BEFORE IT DRIES, or you will not remove the contaminant! Wipe off with clean lint free DRY rags.
*Use 397 waterbourne or 398 for plastic and fiberglass parts.
4)Apply 1 light tac coat and allow to flash for 5 minutes. After 5 minutes apply 1 more tac coat.
5)Allow 10 minute flash before topcoating. If allowed to dry for 1 hour you must apply 1 more coat with a 10 minute flash before proceeding to topcoat.
*Do NOT overapply this product as it will result in lifting of topcoat. Light coats are all that is needed for this product to function properly.
Item# Description Qty. Price
HP2010G-KIT Gallon Adhension Promoter $79.95 ADD TO CART
HP2010Q-KIT Quart Adhension Promoter $35.00 ADD TO CART
Mike Fernandez

| 01-14-2019, 14:44

been using it on multi panel graphics. never had a edge lift or peel....Awesome stuff

Pat Dry

| 01-13-2019, 18:36

Excellent adhesion promoter as stated. Works great as a 1k sealer on sensative substrates. Fantastic for brushing onto a molding for added adhesion for double sided tape to adhere to the molding or emblem. Stays in a pps cup because of the many uses sprayed or wiped.

Nick Knezic

| 11-24-2018, 11:29

Love this stuff, sadly I had just bought a gallon for a big project and it was burn up in the campfire that wipe Paradise Ca off the map..

Be the first to find out about Tamco Paint specials, new product offerings, special events and so much more!